Configure Bluetooth settings on a network printer
The following table describes the Bluetooth settings you can configure on the
Networking
tab of the printer's
embedded Web server (EWS)
if the printer is connected
to the network either wirelessly or with an Ethernet cable:
Note
If your printer is not connected to a network, connect a USB cable from
your computer to the rear USB port on the printer and open the printer
Toolbox
to configure the Bluetooth settings.
Parameter
Description
Device Address
The hardware address of the Bluetooth device.
Note
You cannot change this address.
Device Name
The device name assigned to the printer which can identify
it on a Bluetooth device.
Passkey
A 4-digit value that the user must enter in order to print using
Bluetooth. The default passkey is 0000.
Visibility
Shows whether or not the printer is visible to other Bluetooth
devices that are within range.
●
Visible to all
: Any Bluetooth device within range can
print to the printer.
●
Not visible
: Only Bluetooth devices that have stored
the device address of the printer can print to it.
User's guide
41
Parameter
Description
Security
The level of security set for the printer connected by
Bluetooth.
●
High
: The printer requires a passkey from the
Bluetooth device before allowing the device to send a
print job to it.
●
Low
: The printer does not require a passkey. Any
Bluetooth device within range can print to it.
Tray Select
Note
If the optional
250-Sheet Plain Paper Tray
Accessory
is not installed, the Tray Select options will not
appear.
●
Upper Tray
: Selects the upper tray as the paper
source.
●
Lower Tray
: Selects the lower tray as the paper
source.
Reset Bluetooth
Resets Bluetooth to factory default settings.
●
Yes, reset Bluetooth
: Resets Bluetooth to factory
default settings.
●
No
: Settings remain as they are.